Basic Tutorial Lesson 1.1

In this lesson:

• Communications
• Taking off
• Lateral roll (pitch)
• Acceleration
• Landing

Ask for permission to take off by bringing up the communications console (F4) and clicking the top most button. After you're cleared for take off, the Cobra will automatically start moving and leave the station. You are now in space.

You are flying in a straight line from the exit/entrance of Lave Station into space, with a speed of 375 meters per second relative to the station.

Fire your front bottom thrusters simultaneously with your rear top thrusters (S) until you see Lave station in the middle of the screen. This is called making a lateral roll or adjusting your pitch.

You should have the center of the station centered in your white cross-hair. If you overshoot, use your front top thrusters together with your rear bottom thrusters (W) to correct (the opposite ones of the ones you used before). As long as you hold down these buttons, you will keep rolling, but when you let go, your ship will fire the opposite thrusters to stop rolling. You just rolled around your lateral axis without actually changing direction or speed, so you are still going in a straight line away from the station.

Fire up the in-space communications console, select Lave Station and ask for permission to dock now.

Fire your main thrusters until your speed relative to the station reached zero (I). You are now holding relative position to Lave station.

Start firing the same thrusters again to start accelerating toward the station. Accelerate to about 300 m/s. You will notice a green cross-hair overlapping over the white one. The green one indicates what direction you're going in. When you're about 4 km from the station, fire the forward thrusters to lower your speed to about 100 m/s (K). Then adjust your speed so that you enter with the ship aligned with the station's entrance.

---

Basics Tutorial Part 1 - Next: Lesson 2