Making your first ship

Overview

This page describes point by point how to create your first ship, and get it into Pioneer. You should be able to do this from scratch within a few hours, having no experience whatsoever. We aren't intending to cover much detail at all, but will rather give a simplified overview, and point to other pages with fuller explanations for once you're comfortable with the process.

The following article Pioneer_Wiki/Making_your_first_ship_scratch covers more detailed tips and tricks for ship modelling.

Prerequisites

To follow this tutorial you will need:

A recent copy of Pioneer - using SGModel system. Anything since around Alpha 30 is fine
A recent copy of Blender - this was written on 2.65
A recent copy of GIMP - this was written on 2.8
A three button mouse with a wheel, or equivalent

Other 3D modellers and raster art programs will work fine, as long as you can work with standard formats such as Collada and .png. Other input devices can probably be configured around.

Step by step

Making a ship

More here: Blender

Open Blender

The default scene should consist of a cube, a camera and a lamp. The camera and lamp are irrelevant and won't be exported, but that cube is going places ;-)

Box modelling

Make sure the mouse cursor is on the view of the scene, then hit Ctrl-alt-'q' to toggle quad view

This allows us to easily check we have lined things up correctly.

Shift-'a', then choose 'Mesh' -> 'Cube'

You've just added a cube to the scene. You won't be able to see it yet, as it's perfectly aligned with the 'default' cube: when you add things they'll appear where the 3D cursor is, and you can move that around with the left mouse button, or snap it back to the grid or the centre of the scene using the shift-'s' menu.

Move the mouse cursor onto the top down view, then hit 'g' to move the current selection (our new cube). Hold Ctrl to snap it to the grid, and move it a little further in the plus direction along the Y axis (in the direction the green arrow is pointing). Leave it just touching the edge of the default cube

The scene's centre, where the default cube currently sits, and where the green and red lines cross, will mark the centre of mass of our ship.

Make two more cubes, and leave them touching the default cube on either direction on the X axis. You can use Shift-'a' for Add, or Shift-'d' for Duplicate

Editing vertices

Right-click on the first cube we created to select it

That's the nose of our ship, so it needs to be a bit more pointed.

Hold the middle mouse button in the 3D viewport, and swing the view round to get a better look at it

Mousewheel zooms, Ctrl or Shift and mousewheel moves a viewport horizontally or vertically, and Shift-middle mouse will pan.

Hit Tab to switch to 'Edit mode'

You can now Ctrl-tab between vertex, edge and face edit mode. We should be on vertex edit mode already.

Hit 'a' for deselect all. Right click on one of the bottom vertices at the tip of the nose. Hold Shift, then right click on the vertex above it to chain-select it

'b' for box, 'c' for circle, and Ctrl-left mouse for freehand select are also very useful for selecting multiple things.

Hit Alt-'m' for merge, and choose 'At first'

The vertices will merge, and any edges and faces between them are dissolved.

Do the same for the other two vertices, to create a pointed nose
We can also make the nose a bit longer, by selecting each of the newly merged vertices then typing 'g', 'y', '2', 'Return', moving them both two Blender units (meters in game) further along the Y axis.

We could equally have used the mouse. 's' for scale and 'r' for rotate work in similar fashion, though note that 'r' toggles between two different rotate modes.

Joining and separating

You'll note that the only vertices you can edit are those belonging to the currently selected mesh - you have to Tab back to 'Object mode' to select another object, then Tab back to edit mode before its vertices become visible. If we want to 'fill in' the areas between two meshes, we either have to use another completely separate mesh which lines up with the others, copy part of one mesh into the other, or merge them.

Tab back to object mode, then hit 'a' key to select all
Hit Ctrl-'j' to merge our ship together into a single mesh

If you want to separate off a section, select it in edit mode, hit 'p' and choose 'Selection'

Creating edges and faces

Now you can join up the section between the 'wings' and the 'nose'.

Tab back to edit mode, and chain select two vertices
Hit 'f' to create an edge between them
Select three edges and hit 'f', and you'll create a face. You can also just select three vertices and hit 'f'; Blender will fill in the edges where needed

If you want to make things a bit more complicated, try Ctrl-left clicking to create new vertices and edges. You can 'Subdivide' faces or edges from the panel on the left, or duplicate vertices, edges and faces with Shift-'d'. Extrude (Alt-'e') and Bevel (Ctrl-'b') are also invaluable tools for this kind of modelling.

If you go wrong, use Ctrl-'z' for undo, or select the mistakes, hit 'Del' key and select 'Only edges & faces'.

Cleaning up

You should now have something resembling a simple space ship. Move things around until you're happy with the basic shape.

For a better look, hit 'z' to toggle wireframe view, and numpad '.' to reposition the centre of rotation and zoom around the currently selected object.

While we could move straight onto the textures, we have a little bit of housekeeping due first.

Switch to vertex edit mode then select all with the 'a' key
Choose 'Remove doubles' on the left-hand panel. This merges any selected overlapping vertices

Internal faces

We used the 'short cut' of building our model out of geometric primitives, instead of building it vertex by vertex. This means there are faces inside the model which should never be seen, and to reduce visual glitches, and strain on the renderer, we need to delete them.

In this case, it's pretty easy to spot them all with wireframe mode ('z'). Select and delete them with 'Del' -> 'Only faces'

Sometimes the easiest way is just to delete internal vertices and edges - the faces will go with them.

You can also hide a face (or vertex, mesh, etc.) with the 'h' key, allowing you to see what's inside your model. Alt-'h' brings everything back. Numpad '/' key toggles 'Local view', hiding all other meshes and objects temporarily.

With more complex models, you'll want to make use of layers to isolate parts of your model. Click or use number keys to activate a layer, Shift-click or Shift-number key to activate several (Shift-Alt-number key for layers 11 - 20). '`' key (grave aka backtick, probably just left of '1') to show all, and 'm' key to move objects from layer to layer.

Distortion

We also need to add in any missing edges to smooth out the geometry. Any polygons whose vertices aren't all on the same plane should be divided into triangles (unless they're going to be curved by setting 'Smooth' shading mode).

Faces with kinks in like the above aren't going to look right. Delete them
Add an extra edge, and recreate them with appropriate triangles

Normals

Most faces in Pioneer are only going to have one side. We need to set each mesh to one sided, and check all faces are pointing outwards.

Switch the mesh to single sided in the right-hand panel's 'Object Data' mode

In edit mode, press 'n' key and switch on 'Normals' for faces in the panel on the right. You might want to make them a bit longer than default

Normals show you which way your faces have their 'front' sides. Any that look darker than those around them from the outside of the model are suspect, but the acid test is looking for the little blue spikes, which should all point outwards.

Chain select any faces pointing the wrong way, then flip them round with the 'Flip Direction' button under 'Normals' on the 'Mesh tools' panel on the left

You can also use 'Recalculate normals' to try to do this automatically.

Thrusters

More here: Model system

Now is a good time to start thinking about where your thrusters should go.

In object mode, add an 'Empty' object of type 'Single arrow'
Change its name to 'thruster_001' using the 'Outliner' panel on the right
Duplicate as many as you need, and resize and orient them appropriately

Textures

UV unwrapping

More here: UV coordinates in Blender

Switch Blender to 'UV Editing mode' using the screen layout widget at the top

The left half of the screen now represents the way the texture will be mapped onto our model (analogously to the way a shoebox can be flattened out to its 2D plan, or a globe can be projected onto a 2D map).

Chain-select all of the faces on the top of the model, then hit 'u' and choose 'Unwrap'

A projection of that part of the model will appear in the UV space on the left.

Do the same for the underside, the sides and the back
Use the 'g', 's' and 'r' keys to squeeze these sections in as tightly as possible to the grid

Use the mousewheel to zoom, and middle mouse button to pan around for a better look.

Here I've flipped one side of the ship with 's', 'x', '-1', 'Return', and superimposed both sides. They'll share the same texture.

Ensure all faces are selected with 'a', then choose 'UVs' -> 'Export UV Layout' on the menu at the bottom left, and save the file

Drawing a texture

More here: GIMP, Textures

First we find a nice metallic looking 'base' texture with an appropriate license for the background somewhere on the internet. You might not end up with much of it visible in the end, but it's useful to fill in any gaps. I found some on opengameart.org. Grab anything containing a feature you might want as well.

Working with layers

Open GIMP, and choose 'File' -> 'Open as Layers'
In the file selector, Ctrl-click on the UV map, the metallic background texture, and any other files you need. Hit 'Open'
Use 'Scale tool' to resize the background so it covers the whole image

Use the layer controls to keep a handle on what's going on. Each of the resources you've pasted in should normally remain as an unmodified 'master' on a separate layer - we'll create new layers to do the actual editing in. Toggle visibility with the eye icons on the left - here I've set the background metal (known to GIMP as 'Clipboard' layer at the moment) to invisible. Move layers up and down in the stack with the green arrows.

Move the UV layout to the top of the stack. You'll be using it as a stencil to draw and compose everything else

Copying sections into a working layer

Activate a layer containing some of the details you want to use. Move it higher up in the stack if you want a better view of it
Use the select tools to pick out a section you want to turn into a feature
Choose 'Edit' -> 'Copy', 'Edit' - > 'Paste', then hit the 'New layer' button in the Layers dialogue to create a new working layer for it
Use the 'Eraser tool', or use select tools and 'Edit' -> 'Cut' to trim it down precisely

Tab toggles the floating toolboxes.

Note that editing in GIMP is constrained by several things. You can only use tools such as the eraser within the selected area and on the active layer. If you want to draw outside the boundaries of the layer, use 'Layer to image size' in the 'Layer' menu.

Once you've duplicated bits into the shapes you want, use 'Merge down' or 'New from visible' in the 'Layer' menu to merge the parts into a complete layer

Double click on the names of important layers to rename them, to make it easier to keep track of a complex image.

Layer transform tools

Use 'Perspective', 'Sheer', 'Rotate', 'Scale' and 'Flip' tools to transform the layer so it matches the shape of the face

It's easier if you set the layer you're transforming to invisible. If faces turn out to be distorted or asymmetrical, that isn't a problem. Get the texture to the right shape, and you can adjust the UV map afterwards.

Most of the basic parts are in place.

Healing and cloning

Now we use the 'Heal' and 'Clone' tools to integrate the separate parts we've pasted in, and to remove anomalies or details we don't want in the image.

Hold Ctrl and click on a sample area, that looks how it should. Click and drag over the target

Sometimes repeated short clicks seem to work better with heal. With a little practise, you can erase fairly large elements you don't want. It sometimes works better if you turn down the tool's opacity and use multiple strokes.

Remember to use the selection tools to limit which part of a layer you are drawing on, so you don't erase or modify parts that are already finished. If you use 'Fuzzy select' to select a region in the UV layer, then switch back to the layer you're working on, you can use the selected area like a mask or a stencil.

Done in a rush, but you get the idea :-)

Hand drawing detail

Use Shift to draw straight lines in GIMP. If you want to draw lots of geometric details, you might want to experiment with a vector drawing program such as Inkscape.

Exporting the texture

Export the file as a png, remembering to turn off the visibility of the UV layer, and any others you were just using to work with. I've called mine 'firstship.png'

Reimport to Blender (optional)

You don't need to import the texture to Blender to get it into the game, but it can help to get a good look at it first.

In Blender's UV editing screen layout, choose 'Image' -> 'Open Image' on the menu on the bottom left
Open the finished texture, and make any final adjustments to the UV map

Ctrl-tab between editing vertices, edges, faces and islands.

Switch back to 'Default' screen layout, and switch the right-hand panel to 'Material'. If you included the default cube in your ship, there should already be a material. If there isn't, hit the '+' button to add one
Switch the panel to 'Texture' mode, click the '+' button to add a texture, then change its type to 'Image or Movie'
Under 'Image' click 'Open', and open the texture
Under 'Mapping' set 'Coordinates' to 'UV'

Set 'Viewport Shading' mode on the menu at the bottom to 'Texture'
You might need to make some final adjustments to your thrusters etc. to line them up with the textures.

Add some lights to the scene to get a better look.

Not about to win any beauty contests, but hey, she looks like a spaceship!

Using the model

Export from Blender

Select the mesh, and switch the panel on the right to 'Material'

Make note of the name of the mesh's material - it will probably simply be 'Material'
Select the mesh, and all your thrusters etc. Layer controls might help will this
Choose 'File' -> 'Export' -> 'Collada' in the menu

Use these export settings. I've saved mine as 'firstship.dae'

Creating a .model file

More here: Model system

Now create a plain text file (in other words use a text editor rather than a word processor, which would fill it with invisible formatting information etc.) with the extension .model, which describes the ship's appearance

material Material-material
diffuse 1.0 1.0 1.0
specular 0.3 0.3 0.3
tex_diff firstship.png
mesh firstship.dae

Use the name of the material in Blender, but with "-material" appended to it
Place the .model, .dae and .png files in a suitable directory such as Pioneer/data/models/ships/firstship/

Load Pioneer's Model viewer, and check everything loads OK.

Getting the model into Pioneer

The simplest way to view your model in-game is to replace the model file of the start ship (currently the Wave) with your newly created ship's model file. You'll need to put the .dae and .png in the same directory.

Creating a ship definition

More here: Creating Ships and Stations

...